|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Micrel, Inc. 3.3V SINGLE SUPPLY 1:9 PECL-TO-TTL Precision Edge(R) SY10H641L Precision SY100H641L Edge(R) SY10H641L SY100H641L FEATURES s s s s s s 3.3V power supply PECL-to-TTL version of popular ECLinPS E111 Guaranteed low skew specification Latched input Differential ECL internal design VBB output for single-ended operation Precision Edge(R) DESCRIPTION The SY10/100H641L are single supply, low skew translating 1:9 clock drivers. Devices in the Micrel H600 translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical performance. The devices feature a 24mA TTL output stage with AC performance specified into a 20pF load capacitance. A latch is provided on-chip. When LEN is LOW (or left open, in which case it is pulled LOW by the internal pulldowns), the latch is transparent. A HIGH on the enable pin (/EN) forces all outputs LOW. The 10H version is compatible with MECL 10KH ECL logic levels. The 100H version is compatible with 100K levels. s Reset/enable s Extra TTL and ECL power/ground pins s Choice of ECL compatibility: MECL 10KH (10Hxxx) or 100K (100Hxxx) s Available in 28-pin PLCC package BLOCK DIAGRAM TTL Outputs Q0 PIN NAMES Q1 Pin GT VT Function TTL Ground (0V) TTL VCC (+3.0V) ECL VCC (+3.0V) ECL Ground (0V) Signal Input (PECL) VBB Reference Output (PECL) Signal Outputs (TTL) Enable Input (PECL) Latch Enable Input (PECL) Q2 VE GE Q3 PECL Input D D VBB Q5 LEN EN Q6 D Q Q4 D, /D VBB Q0 - Q8 /EN LEN Q7 Q8 Precision Edge is a registered trademark of Micrel, Inc. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 Rev.: F Amendment: /0 1 Issue Date: March 2006 Micrel, Inc. Precision Edge(R) SY10H641L SY100H641L PACKAGE/ORDERING INFORMATION Q6 VT Q7 VT Q8 GT GT Ordering Information(1) Part Number 18 17 16 25 24 23 22 21 20 19 Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10H641LJC SY10H641LJC SY100H641LJC SY100H641LJC Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb GT Q5 VT Q4 VT Q3 GT 26 27 28 1 2 3 4 5 6 7 8 9 10 11 TOP VIEW PLCC 15 14 13 12 VBB D D VE LEN GE EN SY10H641LJC SY10H641LJCTR(2) SY100H641LJC SY100H641LJCTR(2) SY10H641LJZ(3) SY10H641LJZTR(2, 3) SY100H641LJZ(3) SY100H641LJZTR(2, 3) Notes: SY10H641LJZ with Matte-Sn Pb-Free bar-line indicator SY10H641LJZ with Matte-Sn Pb-Free bar-line indicator SY100H641LJZ with Matte-Sn Pb-Free bar-line indicator SY100H641LJZ with Matte-Sn Pb-Free bar-line indicator GT Q2 VT Q1 VT 28-Pin PLCC (J28-1) Q0 GT 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. Precision Edge(R) SY10H641L SY100H641L ABSOLUTE MAXIMUM RATINGS(1) Symbol VE (ECL) VT (TTL) VI (ECL) VOUT (TTL) IOUT (ECL) Rating Power Supply Voltage Input Voltage Disabled 3-State Output Output Current - Continuous - Surge Lead Temperature Range (soldering, 20sec) Storage Temperature Operating Temperature Value -0.5 to +7.0 -0.5 to +7.0 0.0 to VE 0.0 to VT Unit V V V mA 50 100 +260 -65 to +150 0 to +85 C C C TRUTH TABLE D L H X X LEN L L H X /EN L L L H Q L H Q0 L TLEAD Tstore TA Note: 1. Do not exceed. DC ELECTRICAL CHARACTERISTICS VT = VE = +3.0V to +3.6V TA = 0C Symbol IEE ICCH ICCL Parameter Power Supply Current ECL TTL Min. -- -- -- Max. 30 30 35 TA = +25C Min. -- -- -- Max. 30 30 35 TA = +85C Min. -- -- -- Max. 30 30 35 Unit mA Condition VE Pin Total all VT pins TTL DC ELECTRICAL CHARACTERISTICS VT = VE = +3.0V to +3.6V TA = 0C Symbol VOH VOL IOS Parameter Output HIGH Voltage Output LOW Voltage Output Short Circuit Current Min. 2.0 -- -100 Max. -- 0.5 -- TA = +25C Min. 2.0 -- -100 Max. -- 0.5 -- TA = +85C Min. 2.0 -- -100 Max. -- 0.5 -- Unit V V mA Condition IOH = -3.0mA IOL = 24mA VOUT = 0V 10H ECL DC ELECTRICAL CHARACTERISTICS VT = VE = +3.0V to +3.6V TA = 0C Symbol IIH IIL VIH VIL VBB Parameter Input HIGH Current Input LOW Current Input HIGH Input LOW Voltage(1) Voltage(1) Voltage(1) Min. -- 0.5 2.130 1.350 1.920 Max. 225 -- 2.460 1.820 2.030 TA = +25C Min. -- 0.5 2.170 1.350 1.950 Max. 175 -- 2.490 1.820 2.050 TA = +85C Min. -- 0.5 2.240 1.350 1.990 Max. 175 -- 2.580 1.855 2.110 Unit A A V V V Condition -- -- VE = 3.3V VE = 3.3V VE = 3.3V Output Reference Note: 1. VIH, VIL and VBB are referenced to VE and will vary 1:1 with the power supply. The levels shown are for VE = +3.3V. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. Precision Edge(R) SY10H641L SY100H641L 100H ECL DC ELECTRICAL CHARACTERISTICS VT = VE = +3.0V to +3.6V TA = 0C Symbol IIH IIL VIH VIL VBB Parameter Input HIGH Current Input LOW Current Input HIGH Input LOW Voltage(1) Voltage(1) Voltage(1) Min. -- 0.5 2.135 1.490 1.920 Max. 225 -- 2.420 1.825 2.040 TA = +25C Min. -- 0.5 2.135 1.490 1.920 Max. 175 -- 2.420 1.825 2.040 TA = +85C Min. -- 0.5 2.135 1.490 1.920 Max. 175 -- 2.420 1.825 2.040 Unit A A V V V Condition -- -- VE = 3.3V VE = 3.3V VE = 3.3V Output Reference Note: 1. VIH, VIL and VBB are referenced to VE and will vary 1:1 with the power supply. The levels shown are for VE = +3.3V. AC ELECTRICAL CHARACTERISTICS VT = VE = +3.0V to +3.6V TA = 0C Symbol tPLH tPHL tskpp tskew++ tskew- - tPLH tPHL tPLH tPHL tr tf fMAX -- -- tS tH Parameter Propagation Delay D to Output Part-to-Part Skew(1,4) Within-Device Skew(2,3,4) Min. 2.0 2.5 -- -- -- 2.0 2.0 -- -- 135 1.5 1.25 0.5 (typ.) 0.5 (typ.) Max. 3.0 3.5 0.5 0.3(7) 0.35(8) 3.5 3.5 1.7 1.6 -- -- -- TA = +25C Min. 2.0 2.5 -- -- -- 2.0 2.0 -- -- 135 1.5 1.25 Max. 3.0 3.5 0.5 0.3(7) 0.35(8) 3.5 3.5 1.7 1.6 -- -- -- TA = +85C Min. 2.0 2.5 -- -- -- 2.0 2.0 -- -- 135 1.5 1.25 Max. 3.0 3.5 0.5 0.3(7) 0.35(8) 3.5 3.5 1.7 1.6 -- -- -- Unit ns ns ns ns ns ns ns MHz ns ns ns ns -- -- -- -- Condition CL = 20pF CL = 20pF CL = 20pF CL = 20pF CL = 20pF CL = 20pF CL = 20pF Propagation Delay LEN to Output Propagation Delay /EN to Output Output Rise/Fall Time 1.0V to 2.0V Maximum Input Frequency(5,6) Pulse Width Recovery Time Set-up Time Hold Time 0.5 (typ.) 0.5 (typ.) 0.5 (typ.) 0.5 (typ.) Notes: 1. Device-to-Device Skew considering HIGH-to-HIGH transitions at common VCC level. 2. Within-Device Skew considering HIGH-to-HIGH transitions at common VCC level. 3. Within-Device Skew considering LOW-to-LOW transitions at common VCC level. 4. All skew parameters are guaranteed but not tested. 5. Frequency at which output levels will meet a 0.8V to 2.0V minimum swing. 6. The fMAX value is specified as the minimum guaranteed maximum frequency. Actual operational maximum frequency may be greater. 7. VT = VE = +3.15V to +3.45V, (i.e. VE +/- 5%). 8. VT = VE = +3.0V to +3.6V, (i.e. VE +/- 10%). M9999-032906 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. Precision Edge(R) SY10H641L SY100H641L TTL SWITCHING CIRCUIT VEE USE 0.1F CAPACITORS FOR DECOUPLING. PECL 50 COAX PULSE GENERATOR IN DEVICE UNDER TEST TTL OUT 450 VCC & VCCO 50 COAX 50 COAX USE OSCILLOSCOPE INTERNAL 50 LOAD FOR TERMINATION. CH A OSCILLOSCOPE CH B ECL/TTL PROPAGATION DELAY -- SINGLE ENDED 50% VIN Tpd++ 1.5V VOUT Tpd- - ECL/TTL WAVEFORMS: RISE AND FALL TIMES 2.0V VOUT Trise Tfall 0.8V M9999-032906 hbwhelp@micrel.com or (408) 955-1690 5 Micrel, Inc. Precision Edge(R) SY10H641L SY100H641L 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 6 |
Price & Availability of SY100H641L |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |